1-8
R300
NAVMAN
2.1 Button functions
There are two control buttons, and . These buttons are
pressed separately or together to turn the unit on and off, cycle
through modes, and select mode options.
Throughout this guide the button icons are used as follows:
= press this button
= press this button
= press both buttons together
Note: where it is required to press and HOLD buttons, a countdown
begins. To perform the required action continue to hold until the
counter reaches zero; if you release the button sooner the action will
not be performed.
2.2 Display screen
The illustration above shows the complete display capability of the R300.
Only a sub-set of these elements appear at any time during operation.
The upper screen section displays the antenna and battery
icons, as well as all values and units. The lower screen
section displays the mode icons and the setup icon (SYSTEM
SET).
Mode Icons
2.0 Navman R300 interface
R300 – Interface
Clock
Timer
Timer recall
Speed
Speed (Average)
Speed (Maximum)
Odometer/Altitude
Calories
Zone settings
8 7 23
Cal
ZONE
SET
SYSTEM
SET
kmmi
PM
mft
kcal
kJ
kglb
MAX
MIN
LAP
PACE
km/hmph
RCL
MAX
AVG
RCL
AVG
MAX
8 7 23
Cal
ZONE
SET