manualshive.com logo in svg

Navman R300, User Manual, Page: 22 / 28

Share
Download
Navman R300 User Manual Download Page 22

1-22

R300

NAVMAN

5.1.6.1 Zone (Minimum)

This option lets you set the minimum target speed.

Access this mode

 See section 5.1.6 for access to this mode.

To set Zone minimum

1) Press 

 to start editing (target speed and pace flash).

2) Press   repeatedly to increase value by 0.5 (hold   to 

increase values quickly), or press   repeatedly to decrease 

value by 0.5 (hold   to decrease values quickly).

3) Press 

 to stop editing.

4) Press   to go to the next mode.

5.1.6.2 Zone (Maximum)

This option lets you set the maximum target speed.

Access this mode

See section 5.1.6 for access to this mode.

To set Zone maximum

1) Press 

 to start editing (target speed and pace flash).

2) Press   repeatedly to increase value by 0.5 (hold   to 

increase values quickly), or press   repeatedly to decrease 

value by 0.5 (hold   to decrease values quickly).

3) Press 

 to stop editing. 

4) Press   to go to the next mode.

R300 – Normal operation

pace

target speed (MIN)

target speed (MAX)

pace

ZONE

SET

MIN

PACE

km/h

ZONE

SET

MAXPACE

km/h

Summary of Contents for R300





























Reviews:

No comments