9
Connecting to an external device
For a better viewing experience, you can connect the recorder to an external viewing
device that supports the High Definition (HD) feature via a HD cable (not supplied).
Operating basics
CAUTION:
DO NOT remove or insert the memory card while recording.
Connect the recorder to the car charger according to the installation instructions in the
previous “Using your recorder in a vehicle” section.
Turning the recorder ON and OFF
Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will start right after the recorder turns on. (You can change the setting in
“Record upon Power-on” from the Settings menu. See Page 12 for information.)
When the vehicle engine is turned off, the recorder automatically saves the recording. By
default, the recorder will turn off in 10 seconds. (You can change the setting in “Power-off
Delay” from the Settings menu. See Page 12 for information.)
To manually turn the recorder on and off, press and hold the Power key .
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1.
Press the Menu key
to access the Settings menu.
2.
Select Date / Time and press the OK key.
