background image

Appendix D - Como entrar em contacto connosco

www.navman.com

.

NORTH AMERICA

BNT - Marine Electronics
30 Sudbury Rd, Acton, MA 01720.
Toll Free:    +1 866 628 6261
Fax:   +1 978 897 8264
e-mail:  [email protected]
web: www.navman.com

OCEANIA
Australia

Navman Australia Pty. Limited
Suite 2, 408 Victoria Road
Gladesville NSW 2111, Australia.
Ph:     +61 2 9879 9000
Fax:     +61 2 9879 9001
e-mail: [email protected]
web:       www.navman.com

New Zealand

Absolute Marine Ltd.
Unit B, 138 Harris Road,
East Tamaki, Auckland.
Ph:      +64 9 273 9273
Fax:     +64 9 273 9099
e-mail: [email protected]

Papua New Guinea

Lohberger Engineering,
Lawes Road, Konedobu.
PO Box 810, Port Moresby.
Ph:      +675 321 2122
Fax:     +675 321 2704
e-mail:  [email protected]
web:     www.lohberger.com.pg

LATIN AMERICA
Argentina

Costanera Uno S.A. 
Av Pte Ramón S. Castillo y Calle 13
Zip 1425 Buenos Aires,  Argentina.
Ph:      +54 11 4312 4545
Fax      +54 11 4312 5258
e-mail:

[email protected]

web: www.costanerauno.ar

Brazil

Equinautic Com Imp Exp de Equip 
Nauticos Ltda.
Rua Ernesto Paiva, 139 
Clube dos Jangadeiros 
Porto Alegre - RS - Brasil 
CEP: 91900-200.
Ph:     +55 51 3268 6675 
         +55 51 3269 2975
Fax:     +55 51 3268 1034
e-mail:

   [email protected]

web:   www.equinautic.com.br

Realmarine
Estrada do Joa 3862, 
Barra da Tijuca, Rio de Janeiro,
Brazil. CEP: 22611-020.
Ph:    +55 21 2483 9700
Fax:   +55 21 2495 6823
e-mail: [email protected]
web:    www.realmarine.com.br

Chile

Equimar
Manuel Rodrigurez 27
Santiago, Chile.
Ph:      +56 2 698 0055
Fax      +56 2 698 3765
e-mail: [email protected]

Mera Vennik
Colon 1148, Talcahuano, 
4262798, Chile.
Ph:      +56 41 541 752
Fax      +56 41 543 489
e-mail: [email protected]

Mexico

Mercury Marine de Mexico
Anastacio Bustamente #76
Interior 6 Colonia Francisco Zarabia, 
Zapapan, Jalisco, C.P. 45236 Mexico.
Ph:   +52 33 3283 1030
Fax:   +52 33 3283 1034
web:  www.equinautic.com.br

Uruguay

Alvaro Bermudez, Nautica
11300 Montevideo, Uruguay.
Ph & Fax:  +59 82 628 6562
e-mail:  [email protected]

ASIA
China

Peaceful Marine Electronics Co. Ltd.
Guangzhou, Hong Kong, Dalian, 
Qingdao, Shanghai
1701 Yanjiang Building
195 Yan Jiang Zhong Rd. 510115 
Guangzhou, China.
Ph:   +86 20 3869 8839
Fax:   +86 20 3869 8780
e-mail:  [email protected]
web:  www.peaceful-marine.com

India

Access India Overseas Pvt. Ltd.
A-98, Sector 21,
Noida - 201 301,  India.
Ph:    +91 120 244 2697
TeleFax: +91 120 253 7881
Mobile:   +91 98115 04557
e-mail:   [email protected]

Esmario Export Enterprises
Block No. F-1, 3rd Floor, Surya Towers
Sardar Patel Rd, Secunderbad 500 003.
Ph:   +91 40 2784 5163
Fax:  +91 40 2784 0595
e-mail:   [email protected]
web:   www.esmario.com

Korea

Kumhomarine Technology Co. Ltd.
#604-842, 2F, 1118-15, Janglim1-Dong, 
Saha-Gu,  Busan, Korea.
Ph:    +82 51 293 8589
Fax:   +82 51 265 8984
e-mail:  [email protected]
web:    www.kumhomarine.com

Maldives

Maizan Electronics Pte. Ltd.
Henveyru, 08 Sosunmagu. 
Male', Maldives.
Mobile: +960 78 24 44
Ph:    +960 32 32 11
Fax:   +960 32 57 07
e-mail: [email protected]

Singapore and Malaysia, Brunei, 
Indonesia and Phillipines

RIQ  PTE Ltd. 
Blk 3007, 81 Ubi Road 1, #02-440,
Singapore 408701.
Ph:    +65 6741 3723
Fax :  +65 6741 3746
e-mail:  [email protected]

Taiwan

Seafirst International Corporation
No. 281, Hou-An Road,  Chien-Chen 
Dist.  Kaohsiung,  Taiwan R.O.C. 
Ph:   +886 7 831 2688
Fax:   +886 7 831 5001
e-mail:  [email protected]
web:   www.seafirst.com.tw

Thailand

Thong Electronics (Thailand) Co.  Ltd.
923/588 Ta Prong Road,  Mahachai, 
Muang,  Samutsakhon 74000, Thailand.
Ph:   +66 34 411 919
Fax:   +66 34 422 919
e-mail: [email protected]
    

[email protected]

web:    www.thongelectronics.com

Vietnam

HaiDang Co. Ltd.
763 Le Hong Phong St. Ward 12
District 10, Hochiminh City, Vietnam
Ph:    +84 8 863 2159
Fax:   +84 8 863 2524
e-mail: [email protected]
web:    www.haidangvn.com

MIDDLE EAST
Lebanon and Syria

Balco Stores
Balco Building, Moutran Street,
Tripoli (via Beirut). - Lebanon 
P.O. Box: 622.
Ph:    +961 6 624 512
Fax:   +961 6 628 211
e-mail: [email protected]

United Arab Emirates
Kuwait, Oman, Iran, Saudi 
Arabia, Bahrain and Qatar

Abdullah Moh’d Ibrahim Trading, opp 
Creak Rd. Baniyas Road,  Dubai.
Ph:   +971 4 229 1195 
Fax:   +971 4 229 1198
e-mail: [email protected]

AFRICA
South Africa

Pertec (Pty) Ltd (Coastal Division)
16 Paarden Eiland Road.
Paarden Eiland, 7405
PO Box 527,
Paarden Eiland, 7420
Cape Town, South Africa.
Ph:    +27 21 508 4707
Fax:  +27 21 508 4888
e-mail: [email protected]
web:    www.pertec.co.za

EUROPE
France, Belgium and Switzerland

Plastimo International
15, rue Ingénieur Verrière, 
BP435,
56325 Lorient Cedex.
Ph:   +33 2 97 87 36 36
Fax:   +33 2 97 87 36 49
e-mail:  [email protected] 
web:    www.plastimo.fr

Germany

Navimo Deutschland
15, rue Ingénieur Verrière
BP435- 56325 Lorient Cedex.
Ph:   +49 6105 92 10 09
       +49 6105 92 10 10
       +49 6105 92 10 12
Fax:   +49 6105 92 10 11
e-mail:

 [email protected]

website: www.plastimo.de

Italy

Navimo Italia
Nuova Rade spa, Via del Pontasso  5
16015 Casella Scrivia (GE).
Ph:    +39 1096 80162
Fax:   +39 1096 80150
e-mail:  [email protected]
web:    www.plastimo.it

Holland

Navimo Holland 
Industrieweg 4,
2871 JE Schoonhoven.
Ph:   +31 182 320 522
Fax:   +31 182 320 519
e-mail:  [email protected]
web:    www.plastimo.nl

United Kingdom

Navimo UK 
Hamilton Business Park
Bailey Road, Hedge End
Southhampton, Hants S030  2HE.
Ph:   +44 01489 778 850
Fax:   +44 0870 751 1950
e-mail:  [email protected]
web:    www.plastimo.co.uk

Sweden, Denmark, Finland and 
Norway

Navimo Nordic 
Lundenvägen 2,
473 21 Henån.
Ph:   +46 304 360 60
Fax:   +46 304 307 43
e-mail: [email protected]
web:    www.plastimo.se

Spain

Navimo España
Avenida Narcís Monturiol, 17
08339 Vilassar de Dalt,
Barcelona.
Ph:   +34 93 750 75 04
Fax:   +34 93 750 75 34
e-mail:  [email protected]
web:    www.plastimo.es

Portugal

Navimo Portugal
Avenida de India N°40
1300-299 Lisbon.
Ph:   +351 21 362 04 57
Fax:   +351 21 362 29 08
e-mail:  [email protected]
web:    www.plastimo.com

Other countries in Europe

Plastimo International
15, rue Ingénieur Verrière BP435
56325 Lorient Cedex, France.
Ph:   +33 2 97 87 36 59
Fax:   +33 2 97 87 36 29
e-mail:
[email protected]
web:  www.plastimo.com

HEADQUARTERS

Navman NZ Limited
13-17 Kawana St. 
Northcote.
P.O. Box 68 155, 
Newton,
Auckland,
New Zealand.
Ph:   +64 9 481 0500
Fax:   +64 9 481 0590
e-mail:  [email protected]
web:      www.navman.com

Summary of Contents for FISH 4500/4600





































Reviews:

Related manuals for FISH 4500/4600