FISH 4100 Installation and Operation Manual
NAVMAN
21
Depth range
·
0.6 m (2 ft ) to 180 m (600 ft)
Display type
·
FSTN
·
Screen resolution 160 high x 120 wide (pixels).
·
Yellow multi-level back lighting.
Supply voltage
·
10 to 16.5 V DC.
Supply current
·
120 mA min - no backlighting.
·
180 mA max - full backlighting.
Operating temperature
·
0 to 50°C (32 to 122°F).
Transom transducer cable length
·
FISH 4100 - 10 m (33 ft ).
·
FISH 4150 - 8 m (26 ft).
Typical depth acquisition time from startup
·
2 seconds at 100 feet (30.5 m).
Transducer frequency
·
200 kHz
Transducer power
·
150 Watts RMS @ 13.8 V DC (during burst).
Receiver sensitivity
·
Better than 10 micro volts RMS.
·
Dynamic range 4.0 million to 1 (120 dB).
Standards Compliance
·
EMC: USA
FCC Part 15 Class B.
Europe (CE) EN50081-1 and EN50082-1
New Zealand and Australia (C Tick)
AS-NZS 3548
·
Environment: IP67
Appendix A - Specifications
The following specifications relate to
the FISH 4150 only:
Temperature measurement range
·
0 to 37.7°C (32 to 99.9°F) Resolution 0.1 units.
Speed range
·
1 to 50 kn (57.5 mph, 96.6 kph).
Speed resolution
·
0.0 to 9.9, 10 to 50.
Communications
·
NMEA 0183 (Ver 2.0) 4800 Baud.
NMEA output
NMEA (0183 format) is a standard for interfacing
marine electronic devices. The NAVMAN fishfinder
can output the following data:
·
DBT (Depth Below Transducer).
·
DPT (Depth and Keel offset).
·
TDK (Depth NAVMAN NZ - proprietary).
·
TKV (Speed NAVMAN NZ - proprietary).
·
VHW (Speed).
·
MTW (Water temperature).
·
XDR (Battery voltage).
126.0 mm (5")
27.9 mm
(1.1")
30.5 mm
(1.2")
143.5 mm (5.6")
126.0 mm (5")
88.5 mm (3.5")
