Navman D100 User Manual Download Page 3

4

NAVMAN D100 User Manual

Specifications

• Power supply

10.7 to 16.6 VDC  15 mA nominal, 35mA
with backlight on.

• Operating temperature

0°C to 45°C.

• Size of display

112 x 112 x 20mm (4.4 x 4.4 x 1”). Overall
depth 35mm (1.4”) behind panel.

• Display type

Twisted Nematic (TN) grey background,
0°C to +70°C.

• Illumination

Red LED switchable from front panel.

• RF Interference

Less than 6 dB maximum quieting on any
marine radio channel with 3 dB gain antenna
within 1 metre of instrument display head
(European EC specifications).

• Depth

1 to 130 metres, 0.5 to 67 fathoms or 3 to
400ft.

• Alarms

Shallow and deep water. Audio and LCD
flag.

• Display unit selection

Feet, metres or fathoms, keypad
selectable.

• Display Damping

Three levels keypad selectable.

• Keel Offset

Keel or waterline, ±9.9 ft, ±1.6 fathoms or
±3.0 metres, user resettable.

• Trend Indication

Arrows indicate increasing or decreasing
depth trend.

• NMEA Outputs

DPT, DBT.

• Proprietary Outputs

Alarm and Trend arrows.

• Transducer

200 kHz, 600 ohm, 1500pF parallel
capacitance.

DEPTH

FEET MTRS FATH SHALLOW DEEP

Change Value Up

Depth is decreasing

Indicates alarm is on

Depth is decreasing

Deep Alarm

Set/Indicator

Shallow Alarm

Set/Indicator

Display is backlit for
Night Operation

Indicate depth units

Alarm On/Off

Change Value Down

Summary of Contents for D100











Reviews: