Version 29.11.2022
HW: BOT(V43)(V54)
RL4-NAC12
P
a
g
e
23
2.7.
Picture settings
The picture settings can be adjusted by the 3 buttons on the video-interface. Press the
MENU
button to open the OSD settings menu. To switch to the next menu item, pressing
UP
and
DOWN
will change the selected value. The buttons are embedded in the housing to
avoid accidental changes during or after installation. The picture settings have to be done
separately for AV1 and AV2 while the corresponding input is selected and visible on the
monitor.
Note: The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Pos H
horizontal picture position
Pos V
vertical picture position
Front
Front camera switch back
Duration adjustable for 10, 15 or 20 seconds (10 seconds is preset)
