Version 10.02.2022
HW CAM(V100) / (V10.3)
RL4-MIB3-E
P
a
g
e
7
1.5.1.3.
Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory picture while the reverse gear is engaged to
display factory rear-view camera.
If set to ON, the interface switches to its rear-view camera input
„
V4 Reverse
“
while the
reverse gear is engaged.
Note:
Dip 4, 6, 7 and 8 are out of function and have to be set to
OFF
.
After each Dip-switch-change a power-reset of the Video Interface has to be performed!
1.5.2.
4 dip - red
By using the Dip-switches, the factory Head-unit or vehicle can be chosen which the
interface will be connected to.
Dip position down is
ON
and position up is
OFF
.
Set all dip switches to off
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
