Version 10.02.2022
HW CAM(V100) / (V10.3)
RL4-MIB3-E
P
a
g
e
11
2.3.1.
Warning notes, concernin the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable’s contacting
side always has to correspond to the contacting side of the
connector, concerning the mounting position.
2.4.
Connection
–
20pin picture signal cable
Connect the female 20pin
connector of the daughter PCB’s pre
-connected 20pin
picture signal cable to the video interface’s male 20pin connector.
