Version 04.05.2021
HW:CAM(V98/99/100)/(V45/46)
RL4-MBN6
P
a
g
e
4
Requirements
Brand
Compatible vehicles
Infotainments
Mercedes Benz
A-Class (W177) since 05/2018
B- Class (W247) since 12/2018
CLA Coupé (C118) since 03/2019
CLA Shooting B (X118) since 07/2019
EQC (N293) since 2019
GLA (H247) since model year2020
GLB (X247) since 09/2019
GLC Class (X253) since model year 2019
GLE Coupé (C167) since model year 2019
GLE SUV (W167) since model year 2019
GLS- Class (X166) since model year 2019
Sprinter (W907/910) since model year 2018
V-class (W447) since about 03/2020
MBUX with 7inch monitor
without navigation: MB order code
E3M
with navigation: MB order code
E3M+E1E
or
Comand Online NTG6 - MBUX
with 10.25inch monitor
MB order code:
E4M
Limitations:
Video only
The interface inserts ONLY video signals into the infotainment. For inserting
Audio signals either the possibly existing factory audio-AUX-input or a FM-
modulator can be used. If 2 audio sources shall be connected to the
infotainment, an additional electronic is necessary to switch them.
Factory rear-view camera
Automatically switching-back from inserted video to factory rear-view camera
is only possible while the reverse gear is engaged. To delay the switch-back an
additional electronic part is required.
After market front camera
The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is possible by
external keypad.
Guide lines
Available only for vehicles with 7inch monitor, not for 10inch monitor. If the
interface does not receive the required information from the vehicle CAN-bus,
guide lines won’t be supported.
Factory OBD socket
The permanent connection of an OBD dongle product, e.g. for a tank app or an
electronic driver's logbook, may result in partial failure of switching to the rear
view camera. if the switching signal is obtained from the CAN bus. In this case
an external switching signal from the reverse gear light and an ordinary open
relay or filter are required for the installation of a rear-view camera (see
chapter: "Case 2: Interface does not receive a reverse gear signal").
1.2.
Checking the compatibility of vehicle and accessories
