Version 01.03.2022
HW:CAM(V100)/(V47)
RL4-MBMRT
P
a
g
e
13
2.4.3
Connection - 10pin Power cable (
analogue without CAN-bus
)
Connect the enclosed
10pin power cable’s female 10pin connector to the
male 10pin
connector of the video interface.
Connect the single
black
wire
of the enclosed 10pin Power c
able to stabile vehicle’s
negative ground.
Connect the single
yellow
wire
of the enclosed 10pin power cable to
+12V
permanent
and stabile power supply.
Both single grey coloured and blue coloured wires stay unconnected and have to be
isolated.
Attention: For analogue connection (without CAN bus), the violet wire of the 12-pin
interface cable must also be connected to +12V or +24V ACC accessory power.
(see following chapter).