Version 17.02.2022
HW: CAM(V100)/(V20) and CAM(V100)/(V20)GD
RL4-LR16-8/10
P
a
g
e
15
2.5.
Power supply output (only for RL4-LR16-10)
Depending on the interface or infotainment version (RL4-LR16-8 for Incontrol Touch with
8inch monitor or RL4-LR16-10 for Incontrol Touch Pro with 10.2inch monitor) the function of
the power supply output (red wire) differs!
On the RL4-LR16-10, the red power supply output
ACC out 12V (max 3A)
can be used to
power up an external source (independent of Dip-1 switch setting).
On the RL4-LR16-8, the red power supply output can only be used to power an after-market
front camera for 10 seconds after the reverse gear has been disengaged.
Interface
Dip
Function
RL4-LR16-8
Incontrol Touch
8inch Monitor
Dip 1 ON
+12V (max. 3A) when reverse gear is engaged incl. 10
seconds delay after reverse gear is disengaged and
+12V by manual switching to front camera by keypad
(short press)
Dip 1 OFF
No function!
Variant
Dip
Function
RL4-LR16-10
Incontrol Touch Pro
10.2inch Monitor
Dip 1 ON
+12V (max. 3A) simulated ACC
Dip 1 OFF
+12V (max. 3A) simulated ACC
