Version 21.10.2022
HW: 25(V21)
RL2-LR14
P
a
g
e
9
2.4.
Connection – 10pin Power/CAN cable
Disconnect the female 16pin connector of the factory harness at the rear-side
of the head-unit and connect it to the 10pin PNP power/CAN cable‘s
male 16pin connector.
Connect the 10pin PNP power/CAN cable‘s opposite female 16pin connector to
the previously become free 16pin connector of the head-unit.
Connect the 10pin PNP power/CAN cable‘s 10pin connector
to the 10pin connector of the video interface.
Connect the power supply for the rear view camera to the
10pin PNP power/CAN cable‘s grey cable
„Reverse-OUT“
.
