Version 07.02.2023
HW CAM(V31)/(V22)
CI-RL1-RLK
P
a
g
e
14
2.5.2.
Audio Insertion
This interface can only insert video signals into the factory infotainment. If an AV-source is
connected, audio insertion must be done by factory audio AUX input or FM-modulator. The
inserted video-signal can be activated simultaneously to each audio-mode of the factory
infotainment.
If 2 AV sources shall be connected to the infotainment, additional electronic is necessary to
switch the audio signals.
2.6.
Connection – external keypad
Connect the keypad’s female 4pin connector to the male 4pin connector of the video-
interface.
Note:
Even if the switching through several video sources by the keypad mightn’t be
required, the keypad’s invisible connection and availability is strongly recommended.
