Navitel E505 MAGNETIC, User Manual

Page: 10 / 28

EN
NAVITEL E505 MAGNETIC | 9
Using Device in Vehicle
Windscreen holder
Carefully select a place to attach the holder. Do not attach the holder to the windscreen in a way that limits the driver’s line of sight. If the car
windscreen contains a built-in heating system or UV protection, the quality of signal reception may be lower than usual.
Set-up of windscreen holder
First remove the protective layer from the vacuum cup. Then, select an appropriate place to attach the holder. Make sure the area is clear of dust, dirt,
and moisture, and then secure the vacuum cup on the windscreen. Put the charger cable into the holder. Connect navigator to the holder. Magnetic
holder secures reliable attachment of the device.
When connected, the device automatically turns on. If necessary, the device can be easily detached, without removing the holder. After disconnection,
device will automatically turn off after 15 seconds.
Navitel Navigator
Navitel Navigator is an offline multifunctional navigation application used for efficient route search and planning. Key tasks of the program are
identification and display of current position on the map, automatic and manual setting of route points, object search, calculation, display of travel
information, and many other things.
Press
to open address search and program settings.
Safety requirements
• Do not disassemble or repair device by yourself. In case of failure, contact the service center.
• Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).
• Put the device away from fire sources to avoid explosion or fire.
• Do not expose the device to physical impacts.
• Avoid contacting the device with sources of electromagnetic radiation.
• Do not use chemicals or detergents to clean the product; always turn off the device before cleaning.
• Use accessories only approved by manufacturer.