NAVITAS TSE Series, Installation Manual

Page: 8 / 14

TSE & PSE Installation Manual
Control connections for the PC+:
White/yellow SRO / seat switch
White/green accelerator sweep input
White/blue accelerator negative input
White/grey battery negative or third party BDI
White/red bi-directional function #1 (reach)
White/brown bi-directional function #2 (tilt)
White/orange bi-directional function #3 (aux.)
White/purple optional on-demand steering input
The five output wires (solid colors) can be connected to any solenoids as their functions will be mapped with the
ProBit later.
Cable connections are identical to the standard PC installation.
To setup the system, first proceed to the normal set-up of the TSE and PSE with the ProBit. See the ProBit
section of this manual. Then go into the <SETUP><CONTACTORS><PC+ COILS> to adjust voltage and map
functions for the outputs of the PSE-P.
#6- THE NAVITAS PROBIT
The Navitas Technologies ProBit is a combination Installation and Customizing tool as well as a very efficient
diagnostics and trouble-shooting aid. It consists of simple pull-down menus arranged in four main groups:
A: MAINTENANCE To look at the condition of your equipment
B: CUSTOMIZE To adjust your personal parameters and settings
C: TROUBLESHOOT To test, monitor or run diagnostics on your system
D: INSTALL To install new components, or re-install existing ones
The most complete information and guide to the ProBit is available in the form of a Windows Help File from
your Dealer or in the download area of our Website at
http://www.navitastechnologies.com
This Help file is named “ProBit Faults & Settings Guide” and includes all of the faults that can be detected by
the ProBit with an explanation of the problem and the most probable solutions. It also includes all of the
possible settings of the parameters, the path to find the right menu, the factory defaults and some warnings
about some of the most sensitive settings. The latest file covers ProBit version 1.41 and will be updated as new
versions become available.
The ProBit itself can also be updated if required. Contact your Dealer or Navitas Technologies for more
information if your ProBit complains that it does not recognize a new version of controller.
N/B: When using the ProBit with a Pump Controller (PSE550/800/1000) that is not connected to a Traction
Controller (TSE550/600/1000) you must hold down the “A” and “B” buttons on the ProBit simultaneously prior
to turning on the ignition key, and hold them until a small “M” appears in the corner of the screen.
From that point the ProBit can be used normally to adjust the PC controller.
Navitas Technologies Ltd. Last Updated: 6/13/2006 Page 6