ASSEMBLY
1. Connect the bottom of the adapter tube to the dove
tail on top of the zoom lens, and tighten the set screws
lightly – do NOT over tighten these screws. You will
need a Regular Hex Key 5/64, 0.050” (provided).
2. Thread the C-mount coupler onto your camera, and
once in position, slide the top dove tail of the Adapter
Tube into the bottom of the C-mount coupler, and again
tighten these screws carefully. Should you need to
change the orientation you see on screen, loosen these
screws on the C-mount coupler and rotate the camera.
3. If you are using an UltraZoom or a standard Zoom,
you may screw on the optional lens attachment or an
objective coupler with microscope objective.
3OHDVHQRWHWKHORFDWLRQRIWKH]RRPIXQFWLRQDQG¿QH
focus (may not be on all systems) for adjustment after
assembly.
C-MOUNT COUPLER
ADAPTER TUBE
ZOOM ASSEMBLY
LENS ATTACHMENT (optional)
MOUNTING
The two most important characteristics of any mounting
system are stability and ease of movement. Stability
minimizes any relative motion (vibration) between the
object and the lens which degrades the image. Ease
of movement relates to the ability to critically focus the
OHQVDWKLJKPDJQL¿FDWLRQ
There are three common methods to mount the lens:
1. Mount the Universal Mounting Clamp (1-6270)
(purchased separately) over the adapter. This is
the most rigid method – best for areas with severe
vibrations.
2. Use any of the stand adapter plates offered for use
with common microscope focus blocks.
3. If mounting to the zoom lens itself is required, please
reference the mounting location (A) towards the top of
the zoom assembly.
(A) mounting
location
set
screw
set
screw
CAMERA
zoom
¿QH
focus
set
screw
(do not touch)
set
screw
(do not touch)
