20
Digital Imaging System
Location and Function of Parts on Rear Panel
1. Network Port (10 BASE-T)
Use the ETHERNET cable to connect to LAN.
2. USB Port
Provided for use in the future if required.
3. Printer Port
Provided for use in the future if required.
4. S-Video Output Connector
Connect to the S-Video input connector of a TV
monitor.
5. NTSC/PAL Selector
Set according to the color system of the connected TV
monitor. After changing the position, turn off the power
and turn it on again.
6. XGA Output Connector
Connect to the RGB input connector of the multiscan
PC monitor. (XGA or VGA output)
7. AC In Connector
Connect a power cord which meets the safety regula-
tions of the country where you are using the unit.
(Power requirements: 100 to 240 V AC 50/60 Hz.
Current consumption: 0.65 to 0.35 A)