![background image](http://html2.mh-extra.com/html/navitar/12x-zoom/12x-zoom_instruction-manual_3592022011.webp)
Navitar Motorized Zoom Systems Instruction Manual for Windows
Revision B
Page 11 of 23
2/17/2004
8.5
Mode Pull Down Menu - Connection
This menu item is used to select the desired communications port.
The list of available ports is presented by clicking the black down arrow next to
COM1. Selection is accomplished by clicking on the desired COM port. For
serial communications the list will always contain COM1 through COM4 and Off-
Line selections. For USB devices, the list will contain only the available motor
controllers and the Off-Line setting. If there is only one controller connected to
the PC via USB, the list will show only one USB device.
Note that the COM port selected must match the COM port hardware used to
connect to the controller. Off line selection is used for parameter configuration
and saving.
The selection is confirmed by clicking the OK button.
8.6
Mode Pull Down Menu - Customer
Selecting Customer from the Mode pull down menu activates the Customer
Setup dialog box.
8.6.1 Customer Setup
This dialog box is used to configure the system parameters associated with this
specific motor controller system.