8
4. Controls
1 – “SPEED”
button
If you press the button while the GPS2 displays shows, for
example, “90km/h”, this will change to “L90” and emit an audio
alert signal every time you accelerate over this speed threshold.
To turn off the speed-limit function, just press the button again.
The “d90” display shows that your speed threshold has been
removed. You can now record another one.
2 –“ENTER”
“Add/Delete Memory” button
You can enter your own dangerous zones or points of personal
interest. To do this, just press the ”ENTER” button briefly. The
display will show ”U 1” for example (for the first personal point you
have entered) to confirm that your new personal point will be
memorised.If you later wish to delete this point, you have two
possibilities: When you pass this point again, once the alert
sounds, press the “ENTER” button briefly until the message “dELE”
confirms deletion, or use the delete function of the personal point
organiser application.
If you press and hold the “ENTER” button you will remove all your
personal points and the message “AL dELE” will be displayed.
To check the operation of your GPS2, you can start the auto-demonstration
mode by pressing the two buttons at the same time for 2 to 3 seconds. This
mode allows you to test all the messages, audio alerts and displays. To quit
the auto-demonstration mode, press the two buttons at the same time again,
for 2 to 3 seconds, until the word “End” is displayed on the high-luminosity
screen.
2
1
