18
4.8
Wi-Fi connection
To connect the device to the existing Wi-Fi network refer to the instructions in the Configuration
section.
To connect to the device do the following:
1. Connect the device to the power supply.
2. Wait for the network sign on the device (one long, after 5 second one short blink)
3. In the list of Wi-Fi networks on your computer or smartphone choose the network (SSID)
“NAVIOM”.
4. Open the webpage
from the computer or smartphone
that has been connected to NAVIOM network. You can also open “Naviom AIS” device in the
network environment of your computer.
5. On the device webpage enter the default password NAVIOM
6. You will get an access to the device password change page and change of Wi-Fi network, and
after you will have an access to the main page of device.
Note:
When making changes to the configuration, the device may reboot and your smartphone
or computer may switch to another Wi-Fi network. After making configuration changes, make
sure that you are connected to the Wi-Fi network configured in NAVIOM AIS
Important:
Initially, a password to connect to the device’s Wi-Fi network is not required, and
therefore, after turning on the device, we strongly recommend that you configure the device’s
Wi-Fi network to prevent unauthorized access to the device.
Summary of Contents for AIS
Page 1: ......
