Navini Networks, Inc.
Ripwave MX Modem User Guide
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
s
he Configuration
creen
f the Connection S
are four parameters.
e
, Network ID, Active SW ersion,
and St
on.
The BTS ID indicates the BTS to which the Modem is currently
synchronized. The Network ID indicates the network in which the
Modem is operating. Active SW Version and Standby SW Version
indicate the version number of the software currently loaded in the
“active side” and “standby side” of the Modem’s flash memory.
The two letters in parenthesis following the release number
indicate the type of software load: JD indicates Joint Detection,
while EN indicates Enhanced Nulling.
Analysis,
tatistics, and About. Each of these screens provides unique
capabilities.
’s
you must update your Modem’s software, your Service Provider
ill provide you with instructions regarding what to do.
The Parameter
The Screen Option
Buttons
T
S
At the bottom o
tatus screen,
Thes parameters are BTS ID
andby SW Versi
V
On the left-hand side of the screen, there are five screen option
buttons: Connection Status, Configuration, Trend
S
The Configuration screen enables you to update your Modem
software if your Service Provider directs you to do so. To access
the Configuration screen, press the Configuration button.
If
w
21
