background image

Navini Networks, Inc.  

 

 

 

 

Ripwave MX Surfer Modem User Guide 

32 

English_Surfer_User_Guide_2007-05-04_40-00444-00Ra(6.X)

 

32

32

 

ARTICLE 6 

OBJECT CODE ONLY-NO MODIFICATIONS

 

 

 

6.1 Modifications. In order to maintain the “trade secret” status of the information contained in 

the Licensed Software, Navini Networks, Inc. provides the Software in object-code form 
only. Buyer shall not modify, enhance, adapt, disassemble, translate, decompile or otherwise 
decode any portion of the object code of the Software module.  Buyer shall not use the 
Software without a license to the Software object code. The object code contains the license 
number, date of license, and other license information. This information is placed in the 
object-code portions to prevent unauthorized and unlicensed distributions of the Software. 
Buyer shall not subvert or change any of this information.  Further Buyer shall not make, full 
or partial, copies of any documentation whether printed or machine- readable media supplied 
with the Licensed Software unless expressly granted prior written permission by Navini 
Networks, Inc. 

6.2 

Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with 
respect to the Software (including Section 16).  Buyer is fully liable and responsible for any 
damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer appoints 
a subcontractor who accesses the Software without Navini’s prior written consent. Buyer shall 
defend, indemnify, and hold Navini Networks, Inc., its directors, officers, employees, agents, 
Authorized Partners, and other representatives harmless accordingly for all costs and direct 
and indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is 
pre-approved by Navini in writing for access to the Software, then this Section shall not 
apply. 

6.3 Copyright 

Notices. Buyer shall not remove any copyright or proprietary rights notice or 

identification that indicates Navini Networks, Inc. ownership from any part of the licensed 
Software, it being expressly understood and agreed that the existence of such copyright notice 
should not be construed as an admission or presumption that publication of the licensed 
Software has occurred. 

 

 
 
 
END OF AGREEMENT 
 
Copyright © 2001-2007 Navini Networks, Inc. 
 
All rights reserved. Printed in the USA. 
 
Navini Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are 
trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be 
trademarks and/or service marks of their respective owners.  
 
 

Summary of Contents for Ripwave MX Surfer

































Reviews: