Navini Networks, Inc.
Ripwave MX Surfer Modem User Guide
16
English_Surfer_User_Guide_2007-05-04_40-00444-00Ra(6.X)
Parameters
Screen Option
Buttons
Configuration
Screen
At the bottom of the Connection Status screen are four parameters.
These parameters are BTS ID, Network ID, Active SW Version,
and Standby SW Version.
The BTS ID indicates the Base Station to which the Modem is
currently synchronized. The Network ID indicates the Service
Provider’s network in which the Modem is operating. Active SW
Version and Standby SW Version indicate the version number of
the software currently loaded in the “active side” and “standby
side” of the Modem’s flash memory. The two letters in parenthesis
following the release number indicate the type of software load: JD
indicates Joint Detection, while EN indicates Enhanced Nulling.
On the left-hand side of the screen, there are five screen option
buttons: Connection Status, Configuration, Trend Analysis,
Statistics, and About. Each of these screens provides unique
capabilities, explained below.
The Configuration screen enables you to update your Modem’s
software if your Service Provider directs you to do so. To access
the Configuration screen, click on the Configuration icon.
If you must update your Modem’s software, your Service Provider
will provide you with instructions.
6.0 (JD)
6.0 (JD)
6.0 (JD)
6.0 (JD)
