_____________________________________________________________________________________
NAVINC B.V
Pagina 3
2: INSTALLATION & SAFETY INSTRUCTIONS
Installation must be done by a qualified personnel.
Do not install this interface by yourself. For safe and reliable installation, consult a dealer having special
knowledge.
o
Use the device only at a +12 volt vehicle electrical system. Make sure to have a proper ground.
o
The device should not be set up in direct proximity of heat sources (e. g. power amplifier).
o
Please make sure that no objects or liquids can intrude the interior of the device! (Danger of short circuit!)
o
Please follow all caution advises contained in the mounting guidelines.
o
Please read through all safety instructions and handling directions intently before installation and start up
of the device.
o
Check always the compatibility of the interface for your car before installation. You can check the
compatibility on www.navinc.nl or call NavInc for support.
o
Avoid installing the unit in following places: Where it would hinder your safe driving
–
Where it could
damage the car’s fitting.
o
Make sure the power is fused with 7A or 10A fuses.
o
Please check all the car functions after installing the interface.
o
Make sure the end customer can always reset the interface. You can reset the interface to make it
powerless.
