background image

• 

Important health and safety information 

When using this product, take the following precautions in order to avoid possible damages and 
legal consequences. Always follow all safety and operation manuals exactly and keep them for 
future reference. Observe all warnings in the operation manual and on the product. In order to 
avoid injuries, electrocution, fire and damages to the product, observe the following precautions: 

 

• Electric security 

This product is designed for operation with power supply via the USB port. Any other operation 
mode can be dangerous and may void the warranty claims for this product. This unit contains an 
internal back-up battery. 

 

NOTE: 

RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN 

ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS INCLUDED 
WITH THE PRODUCT. 

 
 
 
 
 
 
 
 

• Precautions regarding direct sunlight

 

Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, 
the battery or the rechargeable battery for an extended period in a vehicle or plate, where the 
temperature can increase to over 60°C (140°F), for example on the dashboard of a car, the 
window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV 
light. Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable 
battery may overheat. 

 

• Damages requiring repairs 

Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable 
battery and contact an authorized repair man or your dealer. 

• 

Liquid or an object has entered the product. 

• 

The product has fallen down or was damaged. 

• 

There are visible signs of overheating. 

• When operated normally, the product does not function flawlessly. 

 

• Avoid using the unit directly after strong temperature changes. 

If the unit is exposed to strong temperature and humidity fluctuations, condensation can form in 
the unit. In order to avoid damage to the unit, please wait until the condensation has dried off 
before using the unit. 

 

 

NOTE: 

If you bring the unit from a cold to a warm environment, or vice versa, first let it get 

accustomed to the new temperature before turning it on. 

 

Summary of Contents for ublox 8













Reviews: