15
3.
Then press
to delete the waypoint permanently.
7.3 Ending the Function GO TO
1. In order to cancel the function GOTO, press the
key.
2.
You will be asked “Exit GOTO”. Switch from NO to YES
with the
key.
3.
Pressing the OK key, will close the active route.
4.
When the function has been stopped the compass will
no longer display a needle.
8. Calibration of the Electronic Compass
z
Recalibrate the electronic compass if you think its data is incorrect or if the compass indicator on the
display blinks.
1.
If it is necessary to calibrate the compass, press the
and
buttons at the same time.
2.
Follow the instructions on the screen. First, put the
NL-125O flat on the table and turn it slowly until the
screen displays changes.
3.
Then place the NL-125O upright on the table and hold
it firmly. It will rotate slowly about its own axis.
4.
Upon completion of the calibration, the display will
Summary of Contents for NL-125O
Page 1: ...5 ...