-5-
5. Exit the Bluetooth-Manager.
6. Launch the suitable software for mapping/navigation, and select the correct COM Port and set
the baud rate to 38400.
1. Perform a softreset on your device if you have any errors or configurationproblems. It can be
performed before or after interconnecting, in order to exclude blocked ComPorts or applications.
. If your BT-453TE interlinked correctly and your Mapping- and Navigationssoftware does not
receive any data, please perform the following steps. Go to: Start--> Settings-->Connection
-->Transfer/Data reception. Check if there is a tick for automatic receiving. If yes, please take out
the tick, leave this window with OK and the following windows with „X“, until you get back to the
Desktop. After that run a softreset. Go to the Bluetooth-Manager, delete the interlinked GPS
mouse and set a new connection.
3. For devices based on Windows Mobile please note that an output connection for the GPS-
receiver is already placed. If this is not the case, please provide a new output connection for
BT-453TE in the Bluetooth manager in the tab „Com connections“. All free comports are being
offered.
4. When interlinking the device a question about a safe connection may occur. Take out the tick for
safe connection.
2.3. General note for pairing !!!
As soon as the receiver is connected to the PDA or SmartPhone, the blue LED will light up and
hence stops blinking. Once a navigation software application, or a test software application, has
access to the COM Port and data starts flowing, the LED will be turn off after roughly one minute.
3. Testing the Bluetooth GPS receiver
3.1 Testtool for Notebook or Desktop using
1. Copy the Navilock PC.exe from the folder Tools which is on the driver CD of BT-453TE and
transfer it to your notebook into a folder of your choice.
. Start the tool out of the folder from which you copied it before.
3. Settings for the COM Port to be used from the Bluetooth receiver.
4. Baud rate settings, choose 38400.
