Navigon 92 PLUS User Manual Download Page 88

Page: 88 / 132

User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live

- 88 -

Handsfree Module

Announce Traffic Events

This setting is available only when the On Request option is selected for

the Route Optimisation setting. Here you can configure whether traffic

messages are indicated only if they are likely to result in a certain time

loss.

►

Only for time loss > 5 min.

►

Only for time loss > 15 min.

►

Show All

Read out traffic information

Here you can configure whether you want TMC messages to be read

out when the

RAFFIC

NFO

window is opened (Yes or No).

Handsfree Module

This chapter is relevant for you only if your navigation device is a

NAVIGON 92 Premium | 92 Premium Live

The navigation device has a hands-free module which supports

Bluetooth connections to Bluetooth-capable mobile phones and

headsets. It can be connected simultaneously to up to two mobile

phones or to a headset.
If you have set up a connection to a mobile phone, you can use the

navigation device as a hands-free module for it.
If you have set up a connection to a Bluetooth headset, you will hear

the voice instructions from the navigation software via the headset. This

is useful for example when travelling on a motorcycle. All other

functions described in this chapter are not available when connected to

a headset.

Not all Bluetooth-capable devices are 100% compatible. Depending on

the device, some functions may not be supported at all or only with

limitations. It may happen that a device cannot be connected when a

certain other device is already connected.

Opening the hands-free module

►

When the map is open, tap on any point of the map to open the

button bar.

►

In the button bar tap on

(Phone).

The

ANDSFREE

ODULE

window opens.

When you start the hands-free module for the first time, a window will

open in which you can start a search for Bluetooth-capable devices.

Summary of Contents for 92 PLUS





































































































































Search results

Summary of Contents for 92 PLUS

Reviews:

Navigon 92 PLUS, User Manual, Page: 88 / 132

Search results

Summary of Contents for 92 PLUS

Reviews: