Navigon 92 PLUS User Manual Download Page 85

Page: 85 / 132

User’s manual NAVIGON 92 Plus | 92 Premium | 92 Premium Live

Useful functions

- 85 -

►

All traffic information: The

LL TRAFFIC INFORMATION

list is opened.

In it all the active messages are sorted by country (in ascending

order, e.g. 'D'), by road type (according to importance, e.g.

motorway) and by road name (in ascending order, e.g. 'A6'). How

many messages exist for the respective road is also indicated.

►

Tap on an entry to list all the traffic obstructions reported for the

road concerned (e.g. A6).

9.7.5

Showing a single message in detail

►

In the

RAFFIC

window tap on an individual message.

The

RAFFIC

NFO

window opens.

The affected route section is presented in the left half of the

window. The distance, the length of the obstruction and the

anticipated time loss are indicated.
The content of the message is shown in the right half.

The navigation system announces the traffic message in question if the

detail view is open. Reading out text messages is not possible in all

languages however.

Note:

You can configure the reading out function. In the

RAFFIC

window tap on

(More) > Settings > Read out traffic information

and select whether you want TMC messages to be read out or not (Yes

or No).

►

Tap on

(Map detail) to view the affected section as a map

section.

Summary of Contents for 92 PLUS





































































































































Search results

Summary of Contents for 92 PLUS

Reviews:

Navigon 92 PLUS, User Manual, Page: 85 / 132

Search results

Summary of Contents for 92 PLUS

Reviews: