User’s manual NAVIGON 13xx | 23xx
Navigation
- 47 -
5.6.3
Map in Navigation mode
After the route was shown in
Preview
mode, navigation was started.
The map opens in
Navigation
mode.
1
Here is shown what signposts should be followed.
2
Here you can see any speed limits, warning signs or prohibiting signs.
3
The route is highlighted in orange.
4
When two manoeuvres need to be executed in quick succession, the
small arrow box indicates the second manoeuvre to be executed.
5
The large arrow box shows a diagram of the next junction which you
should turn on to. The distance remaining to this junction is indicated
underneath.
As you get closer to the junction you will see a spot diagram in addition
to the distance:
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a long time, you will see only a
straight arrow. The distance you must continue straight on is indicated
underneath the arrow.
►
Tap on the large arrow box to hear current route instructions.
6 (Only
NAVIGON 23xx
): The
Traffic Information
box opens if a
reported traffic obstruction affects your route.
If a distance is indicated in the
Traffic Information
box, no detour route
was calculated yet for the traffic obstruction in question.
►
Tap on the
Traffic Information
box in order to open the
P
REVIEW
TMC
window. It shows a map view with the route section
affected by the message and a possible detour.