ENGLISH
8
UNDERSTANDING THE CONTROL BOARD
CONTROL
DESCRIPTION
PRIME
“P” SET
PROBE 1
ACTUAL
COOK
FC
“P”SET
FC
PROBE 2
FC
Press the
Power Button
to power on the unit. The button will glow blue if connected to a power source.
Press and hold the button for two seconds to turn the unit off.
The
Controller Knob
is used to increase or decrease the temperature value. Push the Controller Knob to
confirm the chosen temperature.
PRIME
“P” SET
PROBE 1
ACTUAL
COOK
FC
“P”SET
FC
PROBE 2
FC
The
"P" Set Button
is used to select one of the eight fine tunings when the Temperature Control Dial is set
to the Smoke Setting. Press the button to change the "P" setting to accommodate to your cooking style and
cooking environment, as preferred. With a short push of the button, the setting increases from P0 to P7, then
repeats. Adjustments are only possible in the Smoke Setting. Factory default setting is "P4". If the "P" setting
is adjusted, your preference will be locked-in (saved) until further adjustment is made.
The
"P" Set Button
is also used as a
Temperature Switch Control
to change the temperature readout on
the LCD Screen. Press and hold the button for two seconds to switch to Celsius (ºC) or to Fahrenheit (ºF), as
preferred. Default is set to Fahrenheit.
PRIME
“P” SET
PROBE 1
ACTUAL
COOK
FC
“P”SET
FC
PROBE 2
FC
The
LCD Screen
is used as the information center for your unit. The LCD screen will display your Desired Cook
Temperature, Actual Cook Temperature, and the Meat Probe Temperatures (if connected). If only one Meat
Probe is connected, only one reading will be displayed.
PRIME
NO PELLETS
PROBE 2
PROBE 1
ACT
SET
The
Smoke iT® icon
indicates a connectivity with Wi-Fi. When searching for a connection by Wi-Fi or via
Bluetooth®, the Smoke iT® icon will blink. Once a Wi-Fi connection has been established, the Smoke iT® icon
will stay solid. When connected, get live updates about the actual and set temperatures of the grill, cooking
time, and meat probe temperatures. It also allows you to adjust the settings of your Control Board.
PRIME
“P” SET
PROBE 1
ACTUAL
COOK
FC
“P”SET
FC
PROBE 2
FC
Press and hold the
Prime Button
to activate an extra feed of pellets to the burn pot. This can be used to
add more fuel to the fire before opening the barrel lid, resulting in a quick heat recovery time. It can also be
used while smoking, to increase the intensity of clean smoke flavor. Requested from competition cookers.
PRIME
“P” SET
PROBE 1
ACTUAL
COOK
FC
“P”SET
FC
PROBE 2
FC
The plug-in connection port(s) on the front of the Control Board are for a
Meat Probe(s)
.
When a meat probe is connected, the temperature is displayed on the LCD Screen. When not in
use, disconnect the meat probe from the connection port.
Compatible with Pit Boss® branded
meat probes only. Additional meat probe(s) sold separately.
PRIME
“P” SET
PROBE 1
ACTUAL
COOK
FC
“P”SET
FC
PROBE 2
FC
