4
1
-20 Screw
Handlebar Seat Post Mount
Note 1: This camera does not have a standard tripod mount fastener.
Note 2: Always use the supplied waterproof case or mounting adapter when connecting to other ¼”- screw fixture
accessories (eg. a Tripod)
1. Connect the handlebar clamp (4) to the ¼” (1) screw and turn clockwise until secure.
2. Turn the locking wheel (2) so it applies pressure back against the case.
3. Loosen one bar clamp bolt (3) until the Bar clamp bracket (4) can be rotated 90 degrees.
4. The bracket can then accept and be attached to any round fixture such as the bicycle handlebars.
5. After positioning the handlebar clamp, close up the bottom half of the clamp and tighten the clamp nuts (3).
6. Loosen the tilt knob (5) to adjust the frame angle then tighten off the tilt nut.
7. Panning adjustments can be made by loosening the Locking Wheel, adjust the pan angle and re-tightening the
wheel.
MOUNTING ADAPTOR / SHIELD
This Mounting Adapter allows you to attach OTHER mounting
accessories that use a ¼” screw, without using the waterproof
case.
Note: The camera will clip into this adapter.
Locking Wheel
Bar Clamp
Nuts
Bar Clamp
Tilt Knob
“Screw
Summary of Contents for NAVSPORT720
Page 1: ...NAVSPORT720 USER GUIDE...
Page 3: ...ACCESSORIES IN THE BOX...
