background image

6

10. Grounding and Polarization

       This unit may be equipped with either a polarized 2-wire AC line plug (a plug 

       having one blade wider than the other) or a 3-wire grounding type plug, a plug 

       having a third (grounding) pin. The 2-wire polarized plug will fit into the power 

       outlet only one way. This is a safety feature. If you are unable to insert the plug 

       fully into the outlet, try reversing the plug. If the plug still fails to fit, contact 

       your electrician to replace your outlet. 

       Do not defeat the safety purpose of the polarized plug.

11. Overloading

       When using this product, do not overload the power outlets or extension cords 

       as this could cause fire or electric shock.

12. Accessories

       Do not place this unit on an unstable cart, stand, tripod, bracket or table. 

       If the unit falls, it could cause injury or damage to the system.

13. Object and Liquids

       Never push objects of any kind into this unit through the openings. 

       Never spill liquid of any kind on the unit.

14. Servicing

       Do not attempt to service this unit yourself as opening or removing covers may 

       expose  you to dangerous voltage or other hazards. Refer all servicing to 

       qualified service personnel.

15. Power Line

       The system should not be located near power lines or electric light 

       or power circuits.

16. Damage Requiring Service

       Unplug this unit from the wall outlet and refer to servicing to a qualified 

       service technician if any of the following occur.

        a. If the power supply cord or plug is damaged.

        b. If any liquid has been spilled into objects have fallen in the unit.

        c. If the unit has been exposed to rain or water.

        d. If the unit has been dropped or otherwise damaged.

        e. If the equipment exhibits a distinct change in performance.

17. Replacement Part

       When replacement parts are required, use replacement parts specified by the 

       manufacturer.

Summary of Contents for UHA-432SG

























Reviews: