8
Press and hold
the
Du/TRI
button to terminate Dual Watch mode
and go into Tri Watch mode.
Press and release
the
16
button to terminate Dual Watch mode and
switch to the Priority channel.
Note: During Dual Watch mode, the SCAN and Channel
▲
/
▼
(UP/DOWN)
button are inactive and sounds an error beep if pressed.
Tri Watch
Press and hold the Du/TRI key for 3 seconds to activate Tri Watch
mode. The TRI indicator appears on the LCD. Tri Watch monitors in
cycle Channel 16, the current working channel and the channel you
have set as the Favourite (PLUS) Channel. Tri Watch is
demonstrated in the figure to the left; the sample working channel is
CH 72.
Press and release
the
Du/TRI
button to terminate Tri Watch and
return to the previous working channel.
Press and release
the
16
button to terminate Tri Watch mode and
switch to the Priority Channel.
Note:
During Tri Watch Mode, the SCAN, and Channel
▲
/
▼
(UP/DOWN)
keys are inactive and sounds an error beep if pressed.
Resetting the Radio
You can reset many radio settings back to their factory defaults, this
will:
• Erase any channels stored in memory
• Return to International channels, if another mode is selected
• Turn OFF the Weather Alert setting, if active
• Return power settings to their original state
To perform the reset:
1. Turn the radio OFF.
2. Simultaneously press and hold the
SCAN & UIC
button.
3. While continuing to hold these keys, power the radio ON.
The LCD remains blank for 2 seconds, and then the unit switches to
channel 16.
