9
Attaching and Charging Your Battery Pack
Before attaching the pack, you should detach the belt clip first, then
aligningly place the pack on the unit and secure it using the supplied
screw.
The design of the battery pack let you can charge it either when it is
attached on the radio or being detached. You should use the supplied
specialized wall charger to charge it (7.2V Ni-MH battery pack) for
14~15hrs. For charging the battery pack, Connect the AC wall
adapter into a standard wall socket and insert the plug into the charge
jack on the side of the battery pack to start the charging.
Note: The charging can not stop itself without prevention, even when the
battery pack has been fully charged. Do not forget to take the radio/battery
pack out of the charger cradle when it has been fully charged.
Overcharging batteries may result in damage to both the battery pack and
radio.
Using the Belt Clip
The supplied belt clip lets you easily attach the transceiver to
your belt. To attach the belt clip, put it onto the back of your
transceiver aligning the fitting groove and use a standard
PHILIP screw driver to secure.
