background image

WM-4 Marine Weather & Audio Receiver Installation Manual

21

Verify Operation

Power on the system, and the WM-4 Receiver. Verify 

that the Power LED light is on (blue), and that the 

Network LED light is randomly flashing green, which 

indicates normal network traffic. 

Consult “Troubleshooting” on page 22 if the 

indicator LED lights are not on, or if the Network 

LED light is showing a blinking pattern.

Subscribe to SiriusXM Services

You can subscribe to the SiriusXM Marine service 

and add satellite Radio at a discount by following 

these steps:

1. 

Make sure the system is turned on. Verify 

that you are receiving the SiriusXM signal by 

entering the SiriusXM menu in your MFD.

2. 

Make a note of the Radio ID. You can find it on 

a label on the WM-4 Receiver packaging and 

on the label on the underside of the WM-4 

Receiver.

NOTE!

 The Radio ID does not use the letters I, O, S, or F.

3. 

Activate your service:

 

In the USA: 

First see our Customer Agreement for 

complete terms at www.siriusxm.com/marine 

and then:

• Online: Go to 

www.siriusxm.com/activate

 

 

   OR

• By phone: 

1-855-SXM-WTHR

 (

1-855-796-9847)

 

In Canada:

 

First see our Customer Agreement for 

complete terms at www.siriusxm.ca/marine and 

then:
•  Online: Go to 

www.siriusxm.ca/activate

 

 

   OR

• By phone: 

1-844-823-0843

4. 

Activation usually takes 10 to 15 minutes, but 

may take up to an hour. We recommend that 

your MFD remain on until subscribed. 

5. 

Activation signals can be sent again at any time 

by visiting 

www.siriusxm.com/refresh 

(in USA) 

or

 www.siriusxm.ca/refresh 

(in Canada).

Summary of Contents for WM-4





























Reviews: