Navico BSM-1, Installation Manual

Page: 21 / 26

Parts List | 19
EN
Part no Description
000-0106-82 B260 Bronze Thru Hull 50/200Khz Depth/Temp
w 19/6˚ Beamwidths and High Speed Fairing
Block.
12 m (39.4 ft) cable
000-0106-91 M260 Plastic In-Hull 50/200Khz Depth Only
Tank Kit w 19/6° Beamwidths.
12 m (39.4 ft) cable
000-0106-77 XDCR ASY HST-DF SBL.
7 m (23 ft) cable
000-10116-001 TM260 Plastic Transom Mount 50/200Khz
Depth/Temp with 19/6° Beamwidths and
Kickup Bracket.
10 m (32.8 ft) cable
Optional parts
Part no Description
AA010009 Navico 8 port Ethernet Linker (RJ45 type)
000-0132-031 Navico NEP-1 4 port Ethernet Linker (HDS
type - orange connector)
000-00022-001 Transducer adapter cable - 6 Pin LTW to 7 Pin
BLUE 0.6 m (2 ft)
000-10046-001 Transducer adapter cable, 7 Pin BLUE with free
ends 0.6 m (2 ft)
Spare parts for service
Part no Description
151-10016-001 Module for BSM-1 box
Special Notes:
1. Cable 000-00022-001 potentially allows use of an
existing Airmar transducer already installed in your
boat. For NSE displays both depth and temp can be
used. Select your transducer with a 10K value in the
installation page of your NSE for proper reading. GB40
and 8000i will display improper temperature until your
transducer is changed to one listed on page 18 with a
5K value.