Connecting BSM-1
|
13
EN
Key
Description
A
Ethernet cable yellow 5 pin.
Cable can be connected directly to NSE or via a Network
Expansion Port. See the
NSE Installation manual
for
more information.
B
Power cable, 12 or 24 V DC
C
Navico 8 port Ethernet Linker AA010009
Simrad GB40 / Northstar 8000i
BSM-1 direct connection to display
Connect power of BSM-1 to same power source as the display.
If BSM-1 is connected directly to the display, it is important
that the BSM-1 is powered on when the GB40 or 8000i is on so
that the display can see a functioning network. C is a standard
Ethernet cable. No X-over
cable is required.
Summary of Contents for BSM-1
Page 2: ......
Page 23: ...Drawings 21 EN 5 Drawings ...
Page 25: ......
Page 26: ...BSM 1 Manual EN 988 0170 03 Rev B 988 0170 03B ...
