3.2.6
Wireless Site Survey Setting
This function provides you with scanning the wireless network; which
means if any Access Point is found, you could choose to connect it
manually when the client mode is enabled, and after you choose the
desired Access Point; this name will be listed automatically in the “SSID” of
“Wireless Basic Settings” page for you to check, please see the
introduction below:
If you choose the “PM_Xin1_Router2” for the Access Point, and click on
“
Next
” as below:
Then the system will be rebooting automatically and goes to the Product’s
Diagram Homepage after 60 seconds:
