Arrow
Mark
5. Close flaring bar and move the flaring body
positioned over the tubing. It should click.
6. Tighten tension rod.
7. Turn the flare handle clockwise and continue
until the clutch engages (clicking).
8. Turn the flare handle counterclockwise until the
upper position of the flaring cone is reached and
the clutch engages (clicking).
9. Loosen the tension rod.
10. Slide out flaring body towards the end and
open flaring bar.
MAINTENANCE
APPLICATION
NTF67D
3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
Carry Case, NFG1 Flare Gauge
Model
Tubing O.D.
Accessory
Caution:
Make sure to raise the flare cone before releasing the flare tension rod or you may pinch or
cut your hands!
1. Keep the 45
°
circular cone clean by wiping away any copper dust after using.
2. Add lubricant frequently to the flare block tension rod and flaring drive threads.
3. Frequently grease the inside bearings and coupling of the flaring drive rod.
Flaring Cone
05
04