BHM
8/1/13
NTV-Doc 134
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
Output 1 will provide a 1 Amp, 12v+ output when the smart-device is linked via Bluetooth to the
SteerBlue. This can be used as a remote turn on for an amplifier or to trip a
NAV-TV VSW (not
included)
to take over smart device control instead of radio control (only if factory or a
aftermarket radio is installed).
The following diagram is laid out as an example of what
could
be programmed. When you program the SWC
interface to learn the vehicle’s steering wheel buttons, you can set any button to do whichever function you
choose (to some extent), therefore button operation will be very install-dependent.
SteerBlue Operation
The SteerBlue can be paired to up to 8 different devices.
Once accessory is present on the red accessory wire of the SteerBlue it will automatically look
for the last device that was active. E.G. if an in dash tablet was last used with the device and
functioning when the vehicle was turned off, the SteerBlue will first attempt to connect to this
device when the ignition is turned on again. If this device is not present, the Bluetooth is not
turned on in the device, or if the SteerBlue has been deleted from the device, the SteerBlue will
look for other devices
paired
with the SteerBlue in order and, if within range, will automatically
pair to the next Smartphone or Tablet (this function may take up to 60 seconds).
While in use, the SteerBlue will stay connected to the paired device in use unless:
o
Bluetooth is turned off on the connected device, or
o
The SteerBlue device is deleted from the connected device.
The SteerBlue will "wake up" the device if in sleep mode automatically upon Bluetooth
connection. (It will not unlock the device if locked)
To begin music playback on smart devices after Bluetooth connection, simply press the button
assigned to the "SOURCE" command once.
On Android devices it
may
be necessary to open the music or APP upon wakeup before the
device can be controlled by the SteerBlue (device dependent, many Androids will begin playing
Voice Control Trigger
(
BAND
for
Alternate
Devices
or double-tap
END
for Android)
Track down
Track up
Home Button
(
END
for
Alternate Devices
and Android)
(
Volume down
Pause/Play
(programmed as
MODE/SOURCE
)
(
Volume up
