BHM
01/14/16
NTV-DOC034
rB2
4 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
RGB-LEX+ Operation
When the
Blue wire
on the interface see’s 12v, the navigation screen will switch to
Video 2
source.
This wire should be connected to a reverse lamp 12v (+).
Toggling the provided switch will switch the factory navigation screen to
Video 1
source.
Note: if not adding a second video source, leave the switch in whichever position where
the factory NAV displays properly on the media screen.
Back-up camera image (or any other image) will only display while in navigation mode.
Only adjust the provided sync dial (slowly) if:
o
All connections are correct
o
You have no image
or
o
Your image is degraded/not clear/shifted to one side
