6 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
Armada Radio & Screen Removal: Warning! The ignition MUST be off!
Pull the radio out of the dash, disconnect all
wiring and set it aside.
Swing the bottom of the monitor upwards to release the
top of the monitor brackets from their U shaped top
mount. Note: There are no top bolts and only a locking
mount. Disconnect the monitor and set it aside.
11
12
Using a soft pry tool remove the cover below
the HVAC panel by prying gently around it to
dislodge it from the retaining clips. Disconnect
all plugs and set it aside.
Remove the two screws at the bottom left and
right with a phillips screwdriver. Above and at a
45 degree angle behind these two screws are 2
more screws. You must use a long phillips
screwdriver to access them. Remove these
screws as well.
