BHM
10/09/15
NTV-DOC243
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
8 |
P a g e
AUDI DYN-EXT Operation
Once all connections have been properly made, placing the vehicle in reverse will
show the connected rear camera image with Dynamic Guidelines which
correspond with the steering wheel geometry.
If a front camera was added and
Automatic front-camera switching
was turned
on, whenever the vehicle leaves reverse (after showing reverse image once) the
connected front camera will display for the user-set amount of time (5, 7, 9 or 11
seconds, see page 7 for menu settings).
If AUX Video is wanted
(no front camera)
, use the
iNAV
button on the steering
wheel for AUX Video switching. The option for AUX Video must be turned on in
the AUX VID Menu (see page7).
For vehicles without ‘iNAV’ button
on the steering wheel, use the
NAV
button near the MMi command
knob for switching to AUX/font
camera
(MMi wire must be
connected, see page 5, step 13).
