BHM
10/09/15
NTV-DOC243
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
7.
Grab the provided
Power/CAN Harness
from the AUDI-DYN-
EXT kit. Use the chart below to locate and solder (splice,
don’t cut) the following wires to the car (
you may have to
extend a pair of CAN wires for Q7
):
AUDI A4, A5, Q5 CAN Wires Location
Vehicle
Interface wires
Connect to AUDI Wires:
Wires Location
ALL
GROUND (Black)
Brown (-)
CAN Gateway or Radio
POWER (Red)
Blue/Red (+)
CAN Gateway or Radio
A4/A5/
Q5
CAN HI (Blue)
CAN HI (Orange/Green)
CAN Gateway (Right side of radio.
Must remove glove box for access.)
CAN LO (White)
CAN LO (Orange/Brown)
CAN Gateway (Right side of radio.
Must remove glove box for access.)
A6
CAN HI (Blue)
CAN HI (Orange/Blue)
Climate Control (Beneath radio)
CAN LO (White)
CAN LO (Orange/Brown)
Climate Control (Beneath radio)
Q3/Q7
CAN HI (Blue)
CAN HI (Orange/Black)
CAN Gateway (High in drivers dash to
the left of steering wheel)
CAN LO (White)
CAN LO (Orange/Brown
with blue dots
)
CAN Gateway (High in drivers dash to
the left of steering wheel)
CAN Gateway
With
MOST
Fiber
Without
MOST
Fiber
CAN Gateway location (A4, A5, Q5)
