BHM
05/20/14
NTV-DOC181
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
3.
From the provided
Power Harness
, solder
pin 9, green
wire
to the
plug side
of the cut
wire from step 2.
4.
From the provided
Power Harness
, solder
pin 18, purple
wire
to the
car side
of the cut
wire from step 2.
5.
Connect (splice) the following wires to the
16-pin factory
green plug
directly to the
left of the gray 20-pin:
6.
Connect the VIM module to the 18-pin connector, and secure it inside the dash with zip-
ties or Velcro. Be sure not to affect any motorized monitor arms (if equipped).
7.
Reinstall the dash pieces and proceed to ‘operation’ to test for proper functionality.
MY-CUE VIM Pin #
Description
Color (in green plug)
1, Yellow
12v (+) Constant
Pin 8; Red/Blue
10, Black
Ground (-)
Pin 16; Black