BHM
06/19/18
NTV-DOC322
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
6 |
P a g e
If adding a front camera OR Aux Video source:
1.
Disconnect POWER/CAN Harness from interface
2.
Place DIP SWITCH 1 in the DOWN position, reconnect power
3.
Press and hold
Voice Control
button on the radio to activate
‘NAVI’ screen
4.
Press
OK
button on remote 4 times, then press
POWER
If the user wants only an AUX video input
without front camera
, set
AV1
SELECT
to
ON
, scroll to the end (right side) of the menu and exit menu.
FRONT CAMERA
setting is used when
the user wants automatic front
camera switching.
Options for 5, 7, 9 or 11 seconds are user-selectable
for the length of time the front camera input stays active once the vehicle
is placed out of reverse.
Once finished with settings,
place DIP SWITCH 1 back into the
UP position
and reset power to interface (if this step is not taken, the unused ‘NAVI’
input will show as an additional video input when cycling video inputs)
JLR-17+ Menu Adjustments
Before you start:
•
The IR-Eye must be connected to the interface
•
Make sure the car’s ignition is on and radio is on
•
You must be in
Reverse Camera
mode.
•
Reverse Camera Mode
adjusts
Reverse Camera Settings
•
Press the
OK BUTTON
4 times (numbers will display per press), then press
POWER
.
•
The
OSD Menu
will appear on screen (auto-time out in about 5 seconds if no
action occurs).
Functional Parking Guidelines ON/OFF
Parking Distance Control
ON/OFF (while in reverse)
Adjust FPG Position
Adjust PDC Position
‘Safe to move?’
ON/OFF
PDC
Select
choice &
Return
Reverse Menu
AUX Video Menu