BHM
06/19/18
NTV-DOC322
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
3 |
P a g e
Installation (Jaguar)
1.
For Jaguar, installation is performed entirely at the radio
(trunk, driver’s side). Using the provided
Vehicle Connection
Harness
, connect the following wires to the
24-pin plug
located at the radio:
2.
Connect the 7-pin pig tail (you just wired to the vehicle) to the main
interface Power harness and connect the main provided plug to the port
on the interface labeled
‘POWER CAN’
.
3.
Disconnect the 6-PIN LVDS cable (white) from the OEM radio and connect it to the
port on the interface labeled
‘LVDS OUT’.
4.
Connect the provided
LVDS Cable
from the
‘LVDS IN’
port on the interface to the
(white, now open) port on the Jaguar radio.
Interface wire
Interface color
Jaguar radio Pin
Jaguar radio color
Ground
Black
1
Black
ACC
Red
3
Yellow
LIN
Yellow
18
Gray/Yellow
CAN 1 HIGH
Blue
17
Violet/Green
CAN 1 LOW
White
16
Gray/Violet
CAN 2 HIGH
Green
---NOT USED---
CAN 2 LOW
Orange
---NOT USED---
Reverse
Green
(not required
–
used for analog camera trigger)