BHM
02/18/19
NTV-DOC166
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
10.
Optional:
Connect the remote eye to the port labeled
‘IR’
(on the power harness)
and
leave it in clear view of the driver (often it can be stuck inside a vent). This connection
would be necessary if you want to be able to adjust anything from the GVIF-JAG
interface’s menu.
Refer to ‘Menu Adjustments’
for menu options.
11.
Optional:
Connect the provided momentary toggle switch to the port on the GVIF-JAG
Power/CAN Harness labeled
‘MODE
SW
’
. Pressing this switch with the ignition
on
will
cycle the screen modes as follows:
factory screen > NAVI (RGB) > AV1 > AV2 > AV3 >
factory screen
. Please refer to the dipswitch section on page
2 for input settings.
12.
Start the car and test for proper functionality before replacing dash pieces.
13.
Note:
All other included harnesses not mentioned in this manual are not needed for most
installations.
If you would like to know more about the full capability of this interface,
contact NAV-TV tech support at 561-955-9770. Additional features not mentioned in this
manual are not supported by NAV-TV at this time.
